The Eagle Premier is a mid/full-size Executive car that was developed by American Motors Corporation (AMC) during the 1980s through its partnership with Renault. This model was manufactured in the brand-new Brampton Assembly in Canada. Chrysler Corporation bought the rights to the Premier when it acquired Renault's outstanding shares in AMC in 1987, and began selling the car under the new Eagle marque.
The four-door sedan was manufactured from September 1987 (for the 1988 model year) until December 1991 (for the 1992 model year). A rebadged variant was also marketed as the Dodge Monaco from 1990 to 1992.
Maps, Directions, and Place Reviews
Design
In 1982 American Motors and Renault, a major shareholder in AMC since 1979, began work on a new downsized full-size front-drive passenger car, code named X-58, for introduction in late 1986. A companion two-door coupe, code named X-59, was to debut for the 1988 model year. These two body styles were to be the first mid-size cars sold by AMC since the 1978 AMC Matador in order to re-position the automaker with a broader product offering in the marketplace.
Rather than engineer a completely new chassis for the Premier the then-new Renault 25's monocoque underpinnings were used as a basis and adapted for the new product. Using the Renault 25 chassis the suspension was derived from the Renault Medallion (Renault 21). The suspension featured a four-wheel independent system with MacPherson struts at the front wheels and two torsion bars at each rear wheel, with stabilizer bars in both front and rear.
The exterior by Giorgietto Giugiaro's Italdesign was picked over other concepts generated by AMC's own styling department and other independent firms. The Premier's body's drag coefficient of 0.31 is slightly lower than the 1986 Ford Taurus that was well known for its aerodynamic shape. The Premier's body was finished using a baked enamel clearcoat for all the available colors. The body was covered by a 7-year, 100,000-mile (160,934 km) warranty. The car's trunk capacity was also large, offering 16.3 cu ft (462 l) of cargo space.
The Eagle also featured new technology to improve luminous efficiency of its headlamp system, afford greater styling freedom, and having a rectangular frontal aspect. The 1988 Eagle Premier was one of the first cars featuring Valeo headlamps with nonparabolic, complex-surface reflector headlamps with optic lenses.
Stretched in all dimensions, the Premier provided more interior room than any of its contemporaries. The interior was an all-new design by AMC's in-house staff under the direction of Richard A. Teague. It also included features that were considered unique at the time. The instrument panel featured "a heavy dose of electronics", with all driver controls housed within a fingertip distance from the steering wheel. It used an unusual dash mounted gear selector with a thin metal lever at the end of which was a grip handle; instead if the gear selector shifting downward in the traditional fashion, the lever dropped into the dash pod in which it was mounted. The climate controls used an unusual up-down button that cycled through the different heating modes, indicated by an array of lights. All of these controls were housed in a control panel on the right side of the steering column. On the left side of the column another control contained the light and windshield wiper controls. The turn signal control was also electronic returning to its centered position immediately after a driver signaled a turn, and a gong indicated its cancellation after completing a turn. The optional cruise control was built into the leather-wrapped steering wheel. Other features included intermittent wipers, as well as automatic variable-speed that adjusted wiper speed to the amount of water that hit the windshield; with less moisture, the slower they would move, but increasing their action if a passing truck splashed the windshield with a large amount of water. Standard on all Premiers was an electronically tuned stereo sound system.
There was a choice of two powertrains. Eschewing the Renault 25's French-built four-cylinder engines, the base Premier LX trim featured a standard 2.5 L AMC four-cylinder engine. Featuring electronically controlled throttle-body fuel injection, it developed a peak power output of 111 hp (83 kW; 113 PS) and 142 pound force-feet (193 N?m) of torque at 1400 rpm. This engine was coupled to a new electronically controlled four-speed automatic gearbox, developed by ZF Friedrichshafen. Fuel economy for the base model was EPA estimated at 22 mpg-US (11 L/100 km; 26 mpg-imp) in the city and 31 mpg-US (7.6 L/100 km; 37 mpg-imp) on the highway, giving it a 527-mile (848 km) cruising range with the 17 US gal (64 L; 14 imp gal) gas tank. Optional in the LX and standard in ES models was a 3.0 L version of the Peugeot-Renault-Volvo (PRV) V6 engine, fitted with multiple port fuel injection, producing peak power and torque figures of 150 hp (112 kW; 152 PS) at 5000 rpm and 171 lb?ft (232 N?m) at 3570 rpm. Fuel efficiency of the V6 was rated at 18 mpg-US (13 L/100 km; 22 mpg-imp) for the city and 27 mpg-US (8.7 L/100 km; 32 mpg-imp) on the highway. Factory acceleration estimates from standstill to 60 miles per hour (96 km/h) were 11.5 seconds with the four-cylinder, and 10 seconds with the six. The Premier's powertrains were covered by a 7-year, 70,000-mile (112,654 km) warranty, which was longer than offered by any of the competitors at the time.
Developed by AMC, which was "the Big Three's little sister ... with almost no resources, and fighting a vastly superior enemy", Bob Lutz, then a Vice President at Chrysler, wrote that the Premier sedan as one of the "impressive succession of new products" that Chrysler gained from acquiring the small automaker. The Eagle Premier replaced the so-called "Liberty car" that Chrysler had been developing as the basis of its future cars for many years, but was experiencing problems with this major project.
The Eagle Premier was described as "a world class car" by automotive journalists, in addition to its international origins with an Italian design and Canadian assembly. "Considered by some the most sophisticated car in Chrysler's lineup", the Eagle Premier offers an "incredible 122 cubic feet of interior room; almost unheard of for a mid-sized passenger car" along with "European handling". The Premier was "final offspring of the AMC-Renault marriage" and the new car entered the marketplace "well endowed in just about every department. It has the most powerful conventional engines in its field, state-of-the-art electronics with a first-ever feature, and is made in the newest assembly plant in the world."
Model years
1988
The Eagle Premier was launched in January 1988, with the first production models rolling off the assembly line on September 28, 1987. Although the car is sometimes referred to as a Renault Premier, this car was never marketed anywhere in the world as a Renault. Pre-production prototypes left the factory with Renault emblems on its grille and wheel covers. but Eagle nameplates on its trunk lid, and the Eagle division had to indicate this difference in its dealer information brochures and videos. Prior to its January 1988 launch, all pre-production cars had the Renault emblem removed from the grille and steering column horn hub pad. Depending on which stereo system was ordered, one would find either a Renault or Eagle emblem in the car through 1989 on the stereo. It was to have been the first bodystyle in a series of three, along with a four-door wagon and a two-door coupe. After Chrysler purchased Renault's stake (46%) in AMC and all other outstanding stock (54%), the wagon and coupe body styles were cancelled as was a planned Premier DL model featuring a five-speed manual gearbox.
The interior of the LX featured standard six-passenger seating, with reclining 55/45 split front bench seats along with a rear seat that included a fold-down center armrest. Map pockets were standard in the front seat backs. The standard four-speed automatic transmissions were operated using a column shifter. The ES models included lower body side cladding, a firmer suspension and larger "touring" tires, as well as individual front bucket seats with adjustable see-through headrests and a full-length console with center armrest. The ES models had seating for five adults. The front bucket seats were optional in the LX, and a console-mounted gear shift was optional in both the LX and ES.
1989
The second model year the Premier saw almost no other changes except for the addition of cruise control and the mid-year introduction of an ES Limited model featuring monochromatic paint and body colored trim.
The "sporty" two-door companion model that was announced by Iacocca for this model year to "get the Eagle soaring" with new products and a "brand personality that's unique ... and exciting ... and upscale" was not released.
1990
In 1990 the Premier was substantially re-engineered. Standard were 4-wheel disc brakes and a stainless steel exhaust system. The electrical system was replaced with standard Chrysler parts that proved to be more reliable than the original Renix system. The exterior was changed slightly, the Design Giugiaro badges being removed from the front fenders as a result. The (unpopular) four-cylinder engine was officially dropped from the lineup, with the V6 remaining as the sole engine.
A badge engineered version of the Premier was added using a familiar Chrysler name, the Dodge Monaco, a moniker that was first used by Dodge in 1965 and last used in 1978 on a full-size, rear-drive sedan.
Because of its design "as up-to-date as anything in the mid-sized market" the Premier now became the foundation for Chrysler's next generation of automobiles.
1991
The 1991 model year had little news for the Premier except for a new anti-lock braking system (ABS) that was also available on the Canadian-built Dodge Monaco twin. The new safety feature came standard on the ES Limited and was optional on other models. The Limited model received a new front grille and rear tail lamp assemblies.
The marketplace saw a downturn and all automakers began offering incentives to move inventory. At the beginning of the year, supplies of the Eagle Premier climbed up to 222 days and Chrysler gave a $1,000 discount to dealers on the invoice price, a $1,500 rebate to purchasers, and a $2,000 incentive to the dealer per car after their fourth sale. An ES Limited model listing for $19,978 was only $15,478 (adjusted for inflation equivalent to US$27,810 in 2017 dollars after the marketing incentives. By the end of the year, Jeep-Eagle dealers had low inventories of Premiers - with only 28 days supply - compared to 119 days for overstocked cars such as the Chevrolet Caprice.
1992
The Eagle Premier and its badge engineered variant, the Dodge Monaco, continued basically unchanged for 1992, except every model received the grille and tail lamps that were only on the Limited in 1991. Chrysler also announced it would be the Premier's final year as the automaker prepared to launch all its new LH models in the Bramalea assembly plant. Bramalea ended Dodge Monaco and Eagle Premier output on December 17, 1991.
Legacy
The Eagle brand targeted consumers that would not typically include purchasing an American sedan, "but would have instead sought out a Volvo or an Audi." The "upscale" Premier was the flagship of the new Eagle division at Chrysler and in the same class "as cars like the Audi 5000, ... roomy, understated and elegantly turned out."
Popular Science, in a four-car road test, considered the Premier one of the sportiest sedans (by measure of road holding and drive precision) available on the American market. The fully independent suspension on all the wheels made for better ride quality and handling characteristics, as did the rack and pinion steering design. "The Premier was for its size, the lightest car that Chrysler built at the time [with a shipping weight of 2,999 lb (1,360 kg)], the stiffest (torsionally), and the best riding almost 8.7 inches (221 mm) of wheel travel vs. 4.5 for the K-cars that underpinned every Chrysler car then available. It benefited from decades of Renault experience with front-wheel-drive, and a good example will still impress even today." The engineering levels achieved in the Premier are arguably the most refined in a sedan that was then produced by AMC or Chrysler.
The original projections were to have annual production of 150,000 Premiers. Magna International had signed a contract in 1986 to supply body panels for the Premiers. As a result, the automotive supplier received $10 million grants from the governments of both Canada and Ontario to expand the metal stamping plant in Milton, Ontario. However, the Premier did not achieve its sales targets, with calendar year production for 1989 only reaching 32,720 examples.
Critics have argued that Chrysler did not properly market the Premier, having confused its intended market. ES models were compared directly with the Audi 80, Acura Legend, and similar 'import' sedans, while LX models were aimed at a lower tier market competing against the Ford Taurus and GM A-platform cars (Buick Century, Chevrolet Celebrity, Oldsmobile Cutlass Ciera). Chrysler also ended up with six different brands after the purchase of AMC, just one less than GM, which was four times as large automaker. Not only could Chrysler not afford to properly promote and advertise each of its brands, it also faced the legacy of failure by French cars in the United States.
The Premier carried many vestiges of AMC and Renault's engineering long after Chrysler acquired the car's design. For example, the vehicle identification number for the entire 1988 model year production retained AMC format. The AMC logo was featured on many of the car's components through to the end of production.
The introduction of a rebadged model named Dodge Monaco resulted from a contractual obligation to use 260,000 of the PRV engines over five years, a clause in the AMC buyout from Renault. The Monaco sold poorly, and both it and the Premier were cancelled in 1992. There was little marketing support for the Premier by the Jeep-Eagle dealers themselves because they were focused on selling the highly successful and more profitable Jeep models. Furthermore, the decision to eventually combine Jeep-Eagle with Chrysler-Plymouth dealers called for the long-term corporate goal of phasing out the Eagle brand. There were 139,051 Premiers and Monacos built at Bramalea. Chrysler paid a penalty for every car not produced and V6 engine not purchased from Renault.
A new, "highly advanced" factory (called Bramalea Assembly) was built to manufacture the Premier at Bramalea. This was near an existing AMC plant in Brampton, Ontario, Canada. This state of the art plant was opened in 1986 and was one of AMC's assets that interested Chrysler. It was renamed Brampton Assembly after the buyout. Brampton Assembly was retooled for the production of the Chrysler LH-cars that debuted in autumn of 1992, including the Premier's replacement, the Vision, and the Vision's sister vehicles, the Dodge Intrepid and the Chrysler Concorde.
The Premier inspired many of the LH platform's design features. François Castaing, formerly AMC's Vice President of product engineering and development, became Chrysler's Vice President of vehicle engineering in 1988, and as a result, the Premier was the starting point for Chrysler's new LH sedans. Although the cab forward styling was quite different, the engines in the LH cars were mounted longitudinally, like the Premier. This was "a hallmark of Renault's front-wheel-drive designs" and unlike any other car built by Chrysler to that time. The LH platform's dedicated transmission, the A606, was also quite similar in design to the electronically controlled automatic featured in four-cylinder Premiers. The Premier's body shell was used for LH prototype development mules, under which the LH drivetrain was tested.
Although only a four-door sedan, the Premier could be a "future classic" according to automotive journalist, Dan Roth, as "one of the best American cars of the last 20 years, able to hold its own against luxury European marques, and being a caretaker of the last AMC car (Jeeps aren't cars!) would be a responsibility we'd relish."
Source of the article : Wikipedia
EmoticonEmoticon